Are outboard controls Universal?

The controls are generally universal but you will need cable ends that match your engine.

Are outboard motor controls Universal?

Generally, all other engines and controls use a “universal” 3300/33C type control cable. Universal cables have 10-32 threaded ends and often require extra hardware to connect to the engine and control.

Are outboard throttle cables universal?

Replacement throttle control cables are generally an OEM or 3300/33C Universal type. Teleflex Marine control cables meet OEM specifications for fit, function, reliability and quality.

Are Mercury throttle and shift cables the same?

It's the same cable for throttle as well as shifting so select 2 if you need to change both.

Can you shorten outboard control cables?

Re: Shortening Remote Shift-Throttle Cables, Wiring Harness, Battery Cables. There is no known method of changing the length of a remote throttle or shift mechanical cable in the field. Your best--and probably only option--is to purchase new cables of the proper length.

How are engine control cables measured?

HOW TO MEASURE CONTROL CABLE

1. Measure length A + B in feet. This is the distance from the Control Head to the clutch or throttle connection.
2. Ensure that the path is a straight line and has no obstructions along with the routing.
3. Round off the total A + B to the next whole feet which are the cable length.

Are all mercury controls the same?

Fairly common. All depends on how much money you want to spend. The new Gen 2 hardware should all be backwards compatible with your engine. I personally like the Teleflex Extreme cables more than the Mercury standard cables, but they do cost more (usually).

Are Yamaha shift and throttle cables the same?

There are two different cables one is for the throttle and one is for the shifter they are not the same type of cables. ... This cable is a certain length and fits into a control shifter on one end and into the motor on the other .

What are Morse cables?

Morse is a brand name for the Teleflex Morse manufacturing company in the United States of America. Generally, Morse control cables are used in marine and industrial applications.

What are Teleflex cables?

Teleflex is brand name synonymous with marine and industrial control cables. Cable-Tec, manufacture a wide range of marine and industrial control cables for a broad range of applications.

Are Johnson and Evinrude controls the same?

RE: johnson,,evinrude

1973 and later Johnsons and Evinrudes will use the same controls, wiring, and cables. In 1996 they made a wiring connector change on the main harness and make adapters for it. Prior to 73 there were electric shift and hydraulic shift motors along with traditional manual shift engnes.

Are Evinrude controls interchangeable?

The kit is interchangeable with Mallory 9-71100, 9-71101, and 9-71102. Check manufacturer recommendations to ensure a proper fit before purchasing.

Will mercury controls work on a Yamaha?

Sure you can. We have a Merc / Yamaha (Merc-aha) 225 4-stroke on our harbor boat with Merc controls / guages. Merc came up with an adaptor for the merc controls / wiring to plug into the Yamaha.

How are push pull cables measured?

The stroke on a push-pull cable can be calculated by measuring from the end of the support tube to the first thread on the bulk head or on a groove mounted cable you will measure to the front edge of the groove. The stroke is approximately 1.25” shorter than what you measure.

How do you measure throttle cable?

Measure the length of your stock cable. When doing this, only measure the length of the housing; do not include the length of the free wire at each end. Subtract the length of your stock cable from the new measurement that you have made with the wire.

Can you loop a throttle cable?

Loops are OK. Tight S bends are not. Check the cable periodically by unhooking it at the carb and pulling the cable in out to check for roughness. A cable strand breaks and digs into the jacket, eventually binding.

Are Evinrude and Johnson parts interchangeable?

It is true that Johnson / Evinrude lower units can be interchanged however, you can't rely on visual comparison alone.

What is a binnacle control?

The next most popular control box is what is called a Binnacle Control Box. These are a little more fancier and are mounted on the top of the boats console. The throttle and shift is also controlled by a single lever and have the tilt and trim button near your thumb.

Is Teleflex a good company?

As the #1 company in the large device category and the #2 overall winner, medical sales employees are acknowledging Teleflex's positive culture and powerful ability to impact the world around it.