How do you measure a golf club shaft?

A 48” golf club ruler is placed along the backside of the club with the tip of the rule touching the ground by the club's heel. The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel.

What is the standard length of a golf shaft?

Standard retail length is around 45.5 inches, but with so many custom options available, it's very possible to get the shaft cut down before you walk out the door. Some manufacturers have even started adding special shaft lengths as retail offerings.

How do you measure golf clubs with a tape measure?

Measure from the end of the grip to the end of the sole.

Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface. This is the length of your golf club!

What size shaft do I need for my irons?

35-36 inches, your irons should be based on a 5-iron length of 38 inches. 37-38 inches, your irons should be based on a 5-iron length of 38 1/2 inches. 39-40 inches, your irons should be based on a 5-iron length of 39 inches. 41 or more inches, your irons should be based on a 5-iron length of 39 1/2 inches.

How do I choose the right golf shaft?

Put simply, the higher the rating, the more the shaft is prone to twisting. It is the torque that also determines how the shaft feels to every player, which means that the higher the rating, the softer the shaft will feel. A shaft with a 3-degree torque will feel much stiffer than a 5-degree torque, for example.

What weight shaft should I use in my irons?

In general, golfers with slower swing speed and tempo can and should play a lighter shaft. Golfers with very fast speeds and tempo should play heavier shafts. Driver shafts typically weigh 55-60 grams for men and 45-50 grams for ladies. Iron shafts can be as light as 55 grams in graphite, and 130 grams in steel.

How do you measure driver shaft length?

To determine your optimum driver length, look at where you hit the ball on the face of your driver. If your hits are mostly towards the heel, your driver is too long. Another possibility is that the shaft is too light. Try choking down on the shaft and see if your contact improves.

How do you measure a golf club driver?

Simply hold your golf club at 45 degrees to the ground or as in your playing position. At this point take a golf club ruler or take measure and place under the sole of the club. Measure to butt of grip. This will give you you an accurate and USGA standard for measuring your golf driver.

How do you know if your golf clubs are too long?

The most common way to tell if your clubs are too long is that your back will be too upright, the toe of your club will be off the ground at address, and you will often make contact towards the toe of the club.

Is a 46 inch driver too long?

“The standard driver length of 45.5-46.5 inches offered by the majority of companies is too long for most golfers and will prevent them from achieving their maximum potential for distance and accuracy.”

What is the correct driver length?

The standard length of a driver for men used to be 43.5 inches with a steel shaft and 44 inches for a graphite shaft. However, in the 21st century a standard driver is considered to be 45 inches.

What length driver shaft should I have?

Remember, the average driver standard length is 45 inches for men and 44 inches for women (off the rack). With a shorter shaft can help with the right clubhead, you can make magic off the tee and start to shoot consistently lower scores.

How do you measure shaft length on an outboard motor?

To measure your outboard motor shaft length, measure from the bottom of the mounting bracket where it rests on the transom to the top of the cavitation plate, this is the horizontal surface of the lower unit immediately above the propeller.

How do you determine golf club shaft weight?

The heavier a shaft is, the more likely it is that your golf ball will fly low and with less spin. If it's lighter, the ball will tend to fly higher and spin more. As Briand explains, the weight of a shaft has less impact on swing speed than golfers think, but that lighter shafts could increase the rate of closure.

Does 10 grams make a difference in golf shaft?

While most focus more on shaft flex, shaft weight is equally important. 10 grams may not sound like a big deal, but during the golf swing, it can make a big difference. This weight can make a big difference to feel, clubhead speed and dispersion (the accuracy of your drives).

Is a 70 gram driver shaft too heavy?

A 70-gram driver shaft is considered to be pretty heavy but not the heaviest. It falls into the middle but is still on the heavier side when you consider you could go with 50 or 60 grams instead.

What shaft is right for my swing speed?

If you're between 97 and 104 mph with the driver, you need a stiff flex. Regular – Now we are getting into the range where a majority of recreational golfers fall, and also where many LPGA pros fall. If you're between 84 and 96 mph, regular is going to be best for you.

How do you pick a stiff shaft on a golf club?

The higher the speed, the stiffer the shaft. Steel shafts, which are heavier than graphite, are stiff and less forgiving than graphite. According to Golf.com, graphite shafts are lighter and can help increase swing speed. Selecting the right flex for your shaft is key to good ball striking.

What do the numbers on a graphite golf shaft mean?

These numbers are the weight of the shaft in grams. Shaft weights typically range between 50 grams and 85 grams with the 50-60 numbers being pretty common as seen in the example shafts above.

Is it OK to choke up on golf club?

As you can tell, choking up on the golf club is a secret weapon that a lot of golfers don't take advantage of enough. Sure, you will lose some distance by choking up but in general, it's almost always worth it. This is a great way to add new shots in your bag and save yourself when you're hitting it poorly.

Can golf club shafts be shortened?

Shortening the shaft can make the golf club less flexible. If you are going to shorten a golf club, there are a few things to keep in mind. The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points.